How to use and operate the mobile road shot blasting machine?
The mobile road shot blasting machine has obvious advantages in cleaning the road surface, so is the equipment operation very complicated? Let's take a look at how the mobile road shot blasting machine operates.
First, let's introduce the correct boot steps
1. Connect to the power supply and turn on the vacuum cleaner;
2. Make sure the valve handle is in the "off" position, press the control to start walking, press and press "shot blasting open", the shot blasting machine starts, and observe the ammeter. When the shot blasting motor starts, a large current is required until the motor reaches a certain speed. ; When the motor reaches the rated speed, the current will drop to the no-load current state;
3. Set the walking direction to "backward", the equipment will walk, and then set the walking speed of the equipment at the walking speed adjustment button;
4. When cleaning on the concrete surface, the valve can be opened only when the machine is running, otherwise a pit will be thrown on the concrete surface in a short time.
Secondly, the shutdown steps of the road shot blasting machine
1. Safely close the valve handle;
2. Release the walking pinch handle, the walking motor stops;
3. Press the red "Control Off" button;
4. After a few minutes, press the "Fan Off" and "Compression Off" on the vacuum cleaner;
The above are the switching steps of the mobile road shot blasting machine. Is it very simple and easy to operate?