The advantages of mobile shot blasting machine
Mobile steel plate shot blasting machine is mainly used in flat steel plates, titanium plates, steel structures, bridge shipbuilding, machinery manufacturing, engineering machinery, marine platforms, municipal construction and other fields. Clean up the floating slurry and impurities on the surface of the concrete, remove the rust layer and dirt on the surface of the flat plate, and strengthen the internal stress of the steel plate; It can remove road markings and airport markings, and can be used for steel bridge deck waterproofing projects, roughening, etc.
Advantages of mobile steel plate shot blasting machine:
1. High degree of automation. The equipment can climb slopes and walk, and the pellets used can be recycled.
2. No pollution. The equipment is equipped with a dust collector, which can recycle and purify dust.
3. Low energy consumption. Only 0.2 yuan is needed for electricity per square meter, which can save hundreds of thousands of dollars in annual loss costs for enterprises.
4. Mobile is more convenient. The equipment is walkable, designed reasonably and compactly, occupies a small area, and can be brought to the construction site for use at any time.
5. Low investment. The investment is about one tenth of the traditional investment.
6. High efficiency. It can clean 260 square meters per hour, with an SA level of 2.5 or above.
Safe operation and environmental precautions:
1. Operators should wear protective clothing, goggles, gloves, and earplugs when using equipment. If cleaning toxic floating layers, they should wear gas masks.
2. The steel plate mobile shot blasting machine should not be approached by non operators during operation.
3. Before starting up, it is necessary to check whether the equipment is in good condition, ensure that all links are well sealed and securely fastened, and replace vulnerable parts in a timely manner if they are severely worn.
4. When adding shot materials, check if they are qualified. It is recommended that the particle size of the steel sand be 1.5mm. At the same time, check whether there are large impurities such as screws, steel nails, stones, etc. in the steel sand, and clean them in a timely manner to prevent damage to the shot blasting wheel.
5. Adjust the height between the bottom ejection port of the mobile shot blasting machine and the working cleaning surface, usually ensuring that all sides are within 10mm (± 1mm).
6. Do not use the equipment on rainy days or in damp environments to avoid unnecessary losses.
7. Do not use this steel plate shot blasting machine in flammable and explosive environments.
8. When it is necessary to transport or move the flat shot blasting machine, be sure to close the shot control valve, completely stop the rotation of the shot blasting wheel, and cut off the power before operation.
9. Clean up the accumulated dust in the dust collector in a timely manner.
10. After the steel plate is shot blasted, the shot material should be promptly recycled and cleaned for reuse.
11. During the handling and transportation of the shot blasting machine, screws, nails, welding rods, and other debris should be avoided to prevent them from being adsorbed under the shot blasting nozzle. Check and clean once every time the device is turned on.
12. The waste and garbage generated by shot blasting should be centrally piled up, transported, and treated uniformly. Do not litter everywhere, pollute nearby water systems, farmland, etc., and ensure civilized construction operations.